THIS TUTORIAL WAS WRITTEN FOR THOSE
THAT HAVE A WORKING KNOWLEDGE OF PSP
SUPPLIES NEEDED
PAINT SHOP PRO
(ANY VERSION WILL WORK)
TUBE OF CHOICE
I USED ARTWORK BY Alessia C.YOU CAN GET A LICENCE HERE
SCRAP KIT OF CHOICE OR THE ONE I USED Fab-Boo-Lous BY Manipulated By Magik HERE
FONT OF CHOICE
Template OF CHOICE or the one I used MPM 693 by Millie Get HERE

Open template in PSP and delete the copyright layer and activate the background layer.
Then go to "Image""Canvas Size" and resize 800x800, this gives us more room to work with.
Flood fill white the extra blank background.

Go the the largest circle template in the center and click "Selections" "Select All"
"Float" "Defloat" "Paste" paper 17 from kit and go to "Selections" "Invert" hit delete on your keyboard.
Use these instructions for all the templates.
I also used EyeCandy4000 Gradient Glow around some of the templates. Add Drop Shadow.

Go to the top current layer and Paste tube of choice as a New Layer (add any filters of choice to filter
if desired: Radiance, Porcelain, etc.) add drop shadow.

Open the "Boo Wordart" and resize and paste as a New Layer and position in the center right of the tube
add drop shadow.

I wanted to liven up the smaller upper and lower circle templates so I opened Frame 10 in kit and resized and
pasted as a New Layer behind the circles on the background layer, add drop shadow

I also opened Frame 5 and resized and pasted as a New Layer behind the large center circle template, add drop shadow

Go back to the top current layer and open the pumpkin 27 and resize and paste as a New Layer and position to the
lower left next to the tubes foot, add drop shadow

Open the purple stem 57 and resize and paste as a New Layer behind the pumpkin and duplicate and place one next to
the other, add drop shadow

Open the Eyeball Flower 59 and resize and paste as a New Layer and postion behind pumpkin, add drop shadow

Open the green flower 68 and resize and paste as a New Layer and position over and a tad bit under
the Eyeball Flower, add drop shadow

Open black cat 35 and resize and paste as a New Layer and position to the lower right, add drop shadow
embellish with more flowers from kit if desired, add drop shadow

Finally I finished it with the butterfly 105 and resized and pasted as a New Layer and positioned to my liking
and duplicated and mirrored, add drop shadow

ADD FONT OF CHOICE...ADD COPYRIGHT...CROP AND RESIZE IF DESIRED

********MERGE VISIBLE SAVE AS A PNG *********

THANK YOU FOR TRYING MT TUTORIAL XXX
 

 Hello! Hope everyone is having a lovely and peaceful Sunday. I know I am I'm feeling much better! 

I was worried if I had Covid-19 but I feel like a shiny new penny lol so all is good.

I found 9 more of my older kits and they are now here your welcome to them.

I also added 3 more of mine and Tamie's kit...I thought they would be over on Tamie's blog

but when Tamie has time she will put anything of ours on her blog...when I have more time 

than she does I will add them to mine. It's all about who's got more time lol 

I also want to say....I have loved all the time me and Tamie made kits together but some stand out 

more than others. Of all the kits we have made my personal favorite is Dark Lolita.

Yes that is the one I am most proud of. And I hope all of you enjoy it too.

I know my blog needs a little more work: labels, and a few more blinkies of ladies I love in the tagging/scrap community...but please sweethearts just a little more time...pleezy weezy lol

Ok I hope everyone has a great and safe week! Lots of Love, Vicki xxx

HERE 

HERE

HERE

HERE

HERE

HERE

HERE

HERE

HERE

HERE

HERE

HERE

I did what I said I wasn't going to do...make kits lol  

I did this because its FTU and thats what it all about 

for me, making psp/tagging/scrapping a hobby again

not an income. 

We hope you like and enjoy xxx

 Also.....we made this kit with the Caron Vinson Halloween tubes in mind. 

Download HERE

Thank you Silkee xxx

Thank you Tammy xxx

Thank you SunnieSmiles xxx

Thank you Sharon xxx

Thank you Krisy xxx

Thank you Bekki xxx

Thank you Jan xxx

Thank you Marilyn xxx

Thank you Janeann xxx

Hope you like and find useful...Just right click and save xxx

 Hope you like and find useful...Just right click and save xxx

Hope you like and find useful...Just right click and save xxx

THIS TUTORIAL WAS WRITTEN FOR THOSE
THAT HAVE A WORKING KNOWLEDGE OF PSP
SUPPLIES NEEDED
PAINT SHOP PRO
(ANY VERSION WILL WORK)
TUBE OF CHOICE
I USED ARTWORK BY LAGUNA YOU CAN GET A LICENCE HERE
SCRAP KIT OF CHOICE OR THE ONE I USED COUNTRY BLUES BY MANIPULATED BY MAGIK HERE
TEMPLATE BY MILLIE - COWGIRL THEMED #02 HERE
FONTOF CHOICE
MASK OF CHOICE
FILTERS NEEDED: PENTA - JEANS

OPEN TEMPLATE IN PSP AND ACTIVATE THE BACKGROUND LAYER AND GO TO...
"IMAGE"...CANVAS SIZE AND RESIZE 800X800...THIS GIVES US MORE ROOM TO WORK WITH
FLOOD FILL WHITE THE REMAINING BLANK AREA

I DELETED THE WORDART AND BOTH STARS...NOW TO GO THE TOP CURRENT LAYER AND PASTE
YOUR TUBE OF CHOICE...I WANTED TO WORK AROUND THE TUBE, RESIZE YOUR TUBE AND ADD
ANY FILTERS OF YOUR CHOICE (RADIANCE, PORCELAIN) ADD DROP SHADOW

GO TO THE LARGEST CIRCLE TEMPLATE (BLUE) AND....
"SELECTIONS" SELECT ALL, FLOAT, DEFLOAT, PASTE AS PAPER OF CHOICE FROM KIT
"SELECTIONS" INVERT HIT DELETE ON YOUR KEYBOARD, DELETE TEMPLATE LAYER

USE THESE INSTRUCTIONS ON ALL THE TEMPLATES AND ALSO I WANTED A BORDER
AROUND ALL THE TEMPLATES SO I...

"SELECTIONS" - SELECT ALL FLOAT, DEFLOAT..."SELECTIONS" MODIFY...SELECT SELECTION BORDERS
"INSIDE" SELECTED AND ANTI-ALIAS BOX CHECK, BORDER WIDTH: 5
"LAYERS" NEW RASTER LAYER...THEN FLOOD FILL WITH A COLOR OF CHOICE

USE THE PENTA - JEANS FILTER ON THE BORDER WITH SETTINGS: AMOUNT: 30 BORDER WIDTH: 3

NOW DO THAT TO ALL THE TEMPLATES EXCEPT THE DOTTED LINE

"MERGE DOWN" THE BORDERS TO THE CIRCLES AND ADD DROP SHADOW

THE DOTTED LINE...I CHOSE AND BROWN COLOR AND THEN THE DROP SHADOW IS VERY SHARP AND DARK
SO IT LOOKS LIKE ITS THREADED INTO FABRIC

NOW GO TO THE BACKGROUND LAYER AND USE ANY MASK OF YOUR CHOICE TO MAKE A "BLUE SKY-ISH"
LOOK AROUND THE BACK OF THE CIRCLES AND THEN ADD MAGIK CB - 80 FROM KIT OVER MASK

GO TO THE SMALLER CIRCLE LAYER AND OPEN MAGIK CB - 36 AND RESIZE AND PASTE AS A NEW LAYER
JUST SHOWING THE WEEDS AND NOT THE SKULLS TO GIVE IT A FILLED IN MORE LOOK, DUPLICATE AND
PLACE AS MANY AS DESIRED...ADD DROP SHADOW

OPEN MAGIK CB 42 AND RESIZE AND PASTE AS A NEW LAYER AND POSITION TO YOUR LIKING, DUPLICATE AND
MIRROR AND POSITION...ADD DROP SHADOW

OPEN MAGIK CB 7 AND RESIZE AND PASTE A NEW LAYER BETWEEN THE CACTUS'...ADD DROP SHADOW

GO TO THE LAYER JUST BEHIND YOUR TUBE AND OPEN MAGIK CB 55 AND RESIZE AND PASTE AS A NEW LAYER
AND POSITION TO YOUR LIKING...ADD DROP SHADOW

OPEN MAGIK CB 88 AND PASTE AS A NEW LAYER IN FRONT OF THE WAGON WHEEL...ADD DROP SHADOW

OPEN MAGIK CB 33 AND RESIZE AND PASTE AS A NEW LAYER AND PLACE IN FRONT OF GUITAR...ADD DROP SHADOW

IT STILL DID NOT LOOK FINISHED TO ME SO I BORROWED 3 ELEMENTS FROM MBM - FALL FANTASY KIT
ELEMENTS: 13, 23, 24

I RESIZED ELEMENT 13 AND TINKERED WITH THE COLOR SETTINGS USING XERO FILTERS AND PASTED OVER
LARGE CIRCLE AND USED ERASER TOOL TO REMOVE ANY THAT STUCK OUT...ADD DROP SHADOW

I RESIZED ELEMENT 23 AND PASTED AS A NEW LAYER UNDER THE TUBE AND THE ELEMENTS IN THE VERY FRONT
DUPLICATED FLIPPED MIRRORED AND PLACED TO MY LIKING...ADD DROP SHADOW

I OPENED ELEMENT 24 AND RESIZED AND TINKERED WITH THE COLOR SETTINGS USING XERO FILTERS AND
FILLED IN UNDER THE TUBE WHERE IT LOOKED BARE...ADD DROP SHADOW

LAST I OPEN MAGIK CB 75 AND RESIZED AND PASTED AS A NEW LAYER AND PLACED TO MY LIKING AND
DUPLICATED AND AGAIN PLACED TO MY LIKING...ADD DROP SHADOW

ADD FONT OF CHOICE...ADD COPYRIGHT...CROP AND RESIZE IF DESIRED

********MERGE VISIBLE SAVE AS A PNG *********

THANK YOU FOR TRYING MT TUTORIAL XXX
 

Made a gorg forum set with my gf Tamie's new PTU - Pink Tutu and I bloody love this wicked cute kit 

You can find Tamie's Pink Tutu kit HERE

THIS TUTORIAL WAS WRITTEN FOR THOSE
THAT HAVE A WORKING KNOWLEDGE OF PSP
SUPPLIES NEEDED
(ANY VERSION WILL WORK)
TUBE OF CHOICE
I USED ARTWORK BY CARON VINSON YOU CAN GET A LICENCE HERE
SCRAP KIT OF CHOICE OR THE ONE I USED WORDS BY ADDICTIVE PLEASURES HERE
FONTOF CHOICE
MASK OF CHOICE OR THE ONE I USED ON MY BLOG HERE

OPEN TUBE OF CHOICE...THE TUBE I'M USING I USED ACTUAL SIZE
 DID NOT RESIZE BUT IF USING A DIFFERENT TUBE SIZE AS DESIRED
ADD FILTERS OFF CHOICE IF DESIRED
I USED XERO "IMPROVER" WITH SETTINGS: 7-18-9
THIS WILL SMOOTH THE TUBE(CARON VINSON TUBES LOOK WRINKLY TO ME LOL)

ALSO I HAD TO TINKER WITH THE COLOR OF THE TUBE SO IT MATCHED THE KIT MORE
FOR THAT I USED THE "SELECTION" AND "FREEHAND SELECTION" TOOL IN PSP
USE THE TOOL TO CAREFULLY SELECT ONLY THE DRESS AND THE BOW ON HER HEAD
YES THIS IS NOT EASY AND DOES TAKE PATIENCE LOL
ONCE THAT IS DONE USE THE XERO FILTER "TWEAKER" BRING THE "SATURATION" DOWN
BUT GO UP WITH THE "SHADOWS" AND "HIGHLIGHTS" AND TINKER WITH IT TO YOUR LIKING

I USED XERO "RADIANCE" MY SETTINGS VARY BUT FOR THIS TUBE MY SETTINGS WERE:
STRANGENESS: 140 CHARM: 115 TRUTH: 95 BEAUTY: 85
ADD DROP SHADOW AND YOUR TUBE IS READY!

PASTE TUBE INTO FLOOD FILLED CANVAS AS A NEW LAYER

OPEN THE FRAME AND USE AS IS DO NOT RESIZE, PASTE AS A NEW LAYER
TO THE BACKGROUND LAYER BEHIND THE TUBE, ADD DROP SHADOW

RESIZE A PAPER OF CHOICE FROM THE KIT 500X500 AND SINCE IT WAS BARELY PEEKING OUT
FROM BEHIND THE FRAME I JUST USED THE "ERASER" TOOL AND DELETED THE PARTS PEEKING OUT

NOW OPEN THE CLOSEUP CARON VINSON TUBE OR WHATEVER TUBE YOUR WORKING WITH TO BE PASTED
ONTO THE PAPER BEHIND THE FRAME...FOLLOW THE SAME INSTRUCTIONS FOR THE XERO "IMPROVER"
AND "RADIANCE" FILTER...POSITION TO YOUR LIKING AND ALSO POSITION THE REGULAR TUBE ON THE
TOP CURRENT LAYER SO THAT CLOSEUP TUBE IS VISIBLE...USE THE BLENDING PALETTE AND I USED
"SOFTLIGHT" FOR BLENDING THE TUBE

OPEN THE SPARKLES RESIZE IF DESIRED AND PASTE OVER TUBE...GO TO BLENDING PALETTE AND AGAIN I USED
"SOFTLIGHT" TO BLEND SPARKLES

GO TO THE BACKGROUND LAYER BEHIND THE FRAME AND OPEN FLOWER 6 RESIZE 60% AMD PASTE AS A NEW LAYER
USE "MOVE" TOOL AND POSITION SO ITS PEEKING OUT BEHIND THE FRAME...WHEN ITS POSITIONED TO YOUR
LIKING ADD DROP SHADOW AND DUPLICATE AND MIRROR AND DUPLICATE AGAIN AND FLIP SO THAT YOU HAVE
4 CORNERS OF THE FLOWER PEEKING OUT FROM BEHIND THE FRAME...REPEAT THIS PROCESS AGAIN BUT WHEN
YOU PASTE THE FLOWER AGAIN USE THE "MOVE" "PICK" TOOL AND FILL IN THE EMPTY AREAS WITH THE FLOWER
DUPLICATING  AND FLIPPING AND MIRRORING UNTIL THE FLOWER IS ENCIRCLED ALL AROUND BEHIND THE FRAME

NOW GO BACK TO THE BACKGROUND LAYER AGAIN LOL AND USE THE MASK AND ENCIRCLE ALL AROUND THE FRAME
BEHIND THE FLOWERS...I DID NOT USE A PAPER...I USED THE "DROPPER" TOOL AND PULLED A COLOR FLOOD
FILLED A CANVAS EITHER 450X450 0R 500X500 AND USED THE FILTER EYECANDY "HBS NOISE" TO GIVE IT
SOME LUSTER AND SATIN KIND OF LOOK

YOUR DONE WITH THAT BACKGROUND LAYER PHEWWWW I BET YOUR HAPPY ABOUT THAT LOL

GO TO YOUR TOP CURRENT LAYER...NOW YOU WILL BE ACTIVATING/DEACTIVATING YOUR TUBE OF CHOICE
SO YOU CAN SEE WHERE YOUR PASTEING YOUR ELEMENTS

OPEN BOW 3 AND RESIZE 40% AND PASTE AS A NEW LAYER TO THE LOWER LEFT CORNER OF THE FRAME
ADD DROP SHADOW AND DUPLICATE AND MIRROR...NOW DUPLICATE AND POSITION THE BOW BELOW THE FIRST
BOW SO ITS CORNERING THE FRAME...DUPLICATE AND MIRROR

OPEN THE ROSES AND RESIZE 50% AND PASTE AS A NEW LAYER OVER THE UPPER BOW ON THE LEFT DUPLICATE
AND MIRROR...GO TO "IMAGES" AND "ROTATE RIGHT" THE ROSES AND PASTE AS A NEW LAYER OVER THE
PREVIOUS ROSES BUT POSITION UNDER THE PREVIOUS ROSES SO ITS CORNERING THE FRAME

YOU'LL SEE THERE IS AN OPEN GAP ON THE LOWER MIDDLE OF THE FRAME I FILLED THE GAP IN WITH
FLOWERS AND RESIZED 60% PASTEING UNDER THE ROSES TO THE FRAME AND USING MY ERASER TO
REMOVE ANY THAT STUCK OUT AND DIDN'T RIGHT TO ME LOL

OPEN THE SWIRLBLING AND RESIZE 50%...GO IN BETWEEN THE ROSES LAYERS AND PASTE AS A NEW LAYER
AND POSITION VERY LEFT ABD DUPLICATE AND MIRROR

FINALLY OPEN THE DOVES AND RESIZE 85% AND PASTE AS A NEW LAYER AND POSITION TO THE UPPER LEFT
CORNER OF THE FRAME...I LOVED THE RIBBON BUT THE DOVES JUST WASN'T WORKING FOR ME WITH THIS
SO I USED MY ERASER AND REMOVED AND RESIZED THE BUTTERFLY 2 AND DELETED THE STITCHES AND
PASTED AS A NEW LAYER OVER THE AREAS I REMOVED THE DOVES...ADD DROP SHADOW

ADD FONT OF CHOICE...ADD COPYRIGHT...CROP AND RESIZE IF DESIRED

********MERGE VISIBLE SAVE AS A PNG *********

THANK YOU FOR TRYING MT TUTORIAL XXX
 



 

HERE